PETROL GAS TANK, OLD SCHOOL MUSTANG JR, 2.8 GALLON, CHOPPER, BOBBER, CUSTOM

PETROL GAS TANK, OLD SCHOOL MUSTANG JR, 2.8 GALLON, CHOPPER, BOBBER, CUSTOM

Harleys, Triumphs, Choppers etc...

1 piece. Old Skool Mustang Junior bobber gas tank to suit custom applications, uses standard Harley Davidson bayonet type gas cap. Can take 3/8 NPT tap at mid position or 1/4 BSP taps at rear.

Holds approx. 2.8 gallons (10.5 litres).

Thick gauge raw steel ready for prep and paint (Pressure test before final prep is always recommended).

Approx. measurements:

From underneath: widest point front 260mm, 130mm back (near petcocks). Length 410mm.

Actual length including tabs 500mm. Height at front 170mm, rear 100mm (near petcocks).

Tunnel 70mm wide. Tunnel depth 70mm

Custom motorcycle in photo is just an example of how good these tanks can look and is not included in this sale.

This petrol tank has been manufactured to meet Trojan Classic Motorcycles specifications.

This is not a cheap quality petrol tank as sold elsewhere. Most repro tanks are made from thin gauge steel prone to develop pin holes that cause paint to bubble and eventually leak fuel all over your paintwork.

Thick gauge, raw steel ready for prep and paint. Pressure test before final prep is always recommended.

Brand new, Superior quality, Arion Pacific Industries

PTK0090