PETROL GAS TANK, OLD SCHOOL AXED, 2.2 GALLON, CHOPPER, BOBBER, CUSTOM

PETROL GAS TANK, OLD SCHOOL AXED, 2.2 GALLON, CHOPPER, BOBBER, CUSTOM

Harleys, Triumphs, Choppers etc...

1 piece. Old Skool Axed bobber gas tank to suit custom applications, uses standard Harley Davidson bayonet type gas cap. Can take 3/8 NPT tap or 1/4 BSP tap at mid position.

Holds approx. 2.2 gallons (8.5 litres).

Thick gauge raw steel ready for prep and paint (Pressure test before final prep is always recommended).

Approx. measurements:

- From underneath: widest point front 230mm, 100mm back (near petcocks). Length 3900mm.

- Actual length including tabs 460mm. Height at front 200mm, rear 100mm (near petcocks).

- Tunnel 60mm wide. Tunnel depth 85mm

Custom motorcycle in photo is just an example of how good these tanks can look and is not included in this sale.

This petrol tank has been manufactured to meet Trojan Classic Motorcycles specifications.

This is not a cheap quality petrol tank as sold elsewhere. Most repro tanks are made from thin gauge steel prone to develop pin holes that cause paint to bubble and eventually leak fuel all over your paintwork.

Thick gauge, raw steel ready for prep and paint. Pressure test before final prep is always recommended.

Brand new, Superior quality, Arion Pacific Industries

PTK0091